ER2 SERIES

• Overall weight of hoist is comparatively lesser due to aluminium die cast body, which makes the hoist light.
• Equipped with unique load sheave with 5 pockets as standard and 6 pockets for smaller body hoists. Increased number of pockets reduces chain vibration and increases chain life.
• Case hardened Grade 80 nickel plated chain which is produced in-house.
• The dual speed ECH equipped with variable frequency drive (inverter) that is positioned inside the control panel in the hoist. This inverter provides smooth operation of hoist.
• Single speed ECHs are equipped with Counter Hour (CH) meter to monitor starts/stops and total hoist time.

• Equipped with a DC electromagnetic brake. The brake is equipped with electric fail safe design
• Hoist is equipped with thermal protector as standard to protect motor from burning due to excessive usage.
• The ECH is equipped with a friction clutch as a standard in the transmission between hoists motor and load sheave. This protects hoist’s motor and body from damages.
• As ER2 series hoists can be equipped with dual brake (secondary brake as option) up to 5T capacity hoists

Advantages of Product :

• This model can be used in all industries mentioned above at maintenance areas or production/assembly line of plant since overall weight of hoist is comparatively lesser due to aluminum die cast body, which makes the hoist light.
• Since both single speed and dual speed hoists are available in this model, it can be used for installation, commissioning & maintenance of equipment where precise alignment is required.
• As ER2 series hoists can be equipped with dual brake (secondary brake as option) up to 5T capacity hoists, it would be safer while lifting material or expensive equipment to higher elevations. Secondary brake would not allow load/equipment to fall due to excess load or additional load added on to the hoist while lifting.